MOT Status
ExpiredMileage
153,528 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
general condition underneath corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x member (5.3.6 (a) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
general condition underneath corroded
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Nearside Rear Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch (6.1.B.2)
Nearside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Front Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Offside Rear Outer Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Rear Rear fog lamp not working (1.3.2b)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear coil spring corroded (2.4.C.1b)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear coil spring corroded (2.4.C.1b)
Anti-roll bar rubber bush deteriorated but not resulting in excessive movement front and rear mounting bushes (2.4.G.2)
ball joint and track rod end rubber boots slightly deteriorated
coil spring corroded os and ns rear (2.4.C.1b)
head light lenses slightly deteriorated
rear crosss member showing signs of corrosion
rear wheel arches showing signs of corrosion
spare tyre defective
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Registration plate lamp not working (1.1.C.1d)
Anti-roll bar rubber bush deteriorated but not resulting in excessive movement front and rear mounting bushes (2.4.G.2)
ball joint and track rod end rubber boots slightly deteriorated
coil spring corroded os and ns rear (2.4.C.1b)
head light lenses slightly deteriorated
outer sills corroded in non prescribed areas
rear crosss member showing signs of corrosion
rear wheel arches showing signs of corrosion
spare tyre defective
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear coil spring corroded (2.4.C.1b)
Spare tyre defective
Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
headlight lenses slightly deteriorated
os and ns outer sills in non perscribed areas corroded
slight movement in front and rear anti roll bar mounting bushes
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear coil spring corroded (2.4.C.1b)
Spare tyre defective
Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
headlight lenses slightly deteriorated
os and ns outer sills in non perscribed areas corroded
slight movement in front and rear anti roll bar mounting bushes
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
headlight lenses slightly deteriorated
ns front tyre wearing on outer edge
ns outer sill corroded in non perscribed area
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pad(s) wearing thin (3.5.1g)
Registration plate lamp not working (1.1.C.1d)
Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
headlight lenses slightly deteriorated
ns front tyre wearing on outer edge
ns outer sill corroded in non perscribed area
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Front Service brake juddering severely (3.7.C.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Offside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P110 EAB is a 1996 Mazda Bongo in Green with a 2,490cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 53.8%.
Across all 1996 Mazda Bongo models, the average MOT pass rate is 65.9% with a typical mileage of 133,482 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P110 EAB, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 30 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P110 EAB?
You can check the full history of P110 EAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P110 EAB registered?
P110 EAB is a 1996 Mazda Bongo, first registered on 31 December 1996.
Is P110 EAB safe to buy?
The MOT history for P110 EAB shows 26 tests with a 53.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P110 EAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P110 EAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.