MOT Status
ValidMileage
307,720 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated loose (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated loose (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated loose (5.3.4 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated loose (5.3.4 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Inner inner sill corroded centre section but not within 30cm of a stressed member
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside number plate light flashing
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill/arch (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
engine oil leak
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Hydraulic fluid leaking continuously posing a serious risk to road safety steering rack leaking (8.4.1 (a) (ii)) DANGEROUS
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside number plate light flashing
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced hole in sill/arch (6.1.1 (c) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
engine oil leak
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Lower Suspension arm ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
Tyre slightly damaged/cracking or perishing all four perishing (5.2.3 (d) (ii))
both rear light lenses damaged
corrosion both rear outer arches
corrosion to underside of vehicle
suspension components corroded
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Coil spring corroded both (5.3.1 (b) (i))
both rear light lenses damaged
corrosion to underside of vehicle
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
front brake pads wearing thin
n/s/f and o/s/f seat belt prescribed areas have been repaired (outer sills)
n/s/f and o/s/f seat belt prescribed areas slightly corroded
n/s/r and o/s/r component areas repaired
n/s/r bumper corner loose but secure
n/s/r light lens temporarily repaired
o/s/f tyre worn close to the legal limit and heavily worn inner edge
o/s/r inner arch liner loose but secure
slight corrosion in wheel arches
slight oil leak
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear corner of bumper slightly loose but still secure
Nearside Rear light lens temporary repaired
Nearside Rear wheel arch corroded
Offside Front Tyre worn close to legal limit/worn on edge heavily worn inner edge (5.2.3 (e))
Offside Front wheel arch corroded
Offside Rear inner arch cover slightly loose
Offside Rear wheel arch corroded
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Oil leak
engine under tray fitted obscuring some components
Nearside Front Tie bar/rod ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Oil leak
corrosion in nearside and offside outer sills
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle and rear inner sill (6.1.B.2)
Nearside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Headlamp masks/converters fitted
Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Under-trays fitted obscuring some underside components
corrosion in outer sills ( seat belt area )
Nail in offside rear tyre
Nearside Front Shock absorber has a light misting of oil (2.7.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Nearside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Offside Front Tie bar/rod has slight play in a ball joint (2.4.G.2)
Offside Rear Tie bar/rod has slight play in a pin/bush (2.4.G.2)
Nearside Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)
both front brake discs corroded
exhaust system corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Anti-roll bar linkage missing (2.4.G.1)
all brakes slightly binding
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
all brakes slightly binding
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P112 FTT is a 1997 Mazda Bongo in Grey with a 2,490cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 71.4%.
Across all 1997 Mazda Bongo models, the average MOT pass rate is 66.3% with a typical mileage of 131,832 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P112 FTT, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 29 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P112 FTT?
You can check the full history of P112 FTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P112 FTT registered?
P112 FTT is a 1997 Mazda Bongo, first registered on 31 December 1997.
Is P112 FTT safe to buy?
The MOT history for P112 FTT shows 28 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P112 FTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P112 FTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.