MOT Status
ExpiredMileage
24,431 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)
Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Brake hose excessively deteriorated (3.6.B.4d)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Oil leak
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Body has a sharp edge caused by damage (6.1.C.1)
Offside Registration plate lamp not working (1.1.5c)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Fuel cap/sealing device mounting flange/sealing method defective (7.2.4c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Oil leak
center exhaust system heavily corroded
nsf innerwishbone bush starting to split
rear brake pipes heavily corroded
washer jets weak
Nearside Front Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Front Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P122 CFC is a 1996 Mazda 121 in White with a 1,297cc petrol engine. This vehicle has been through 11 MOT tests with a personal pass rate of 63.6%.
Across all 1996 Mazda 121 models, the average MOT pass rate is 60.8% with a typical mileage of 57,937 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying P122 CFC, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 30 years old, this Mazda 121 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P122 CFC?
You can check the full history of P122 CFC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P122 CFC registered?
P122 CFC is a 1996 Mazda 121, first registered on 23 December 1996.
Is P122 CFC safe to buy?
The MOT history for P122 CFC shows 11 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P122 CFC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P122 CFC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.