MOT Status
ExpiredMileage
247,877 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))
Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill back (5.3.6 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember nearside and offside (5.3.6 (a) (i))
Rear fog lamp missing (4.5.1 (a) (ii))
Offside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Front Coil spring corroded nearside and offside (5.3.1 (b) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement nearside and offside front bushes (5.3.4 (a) (i))
Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded nearside and offside (5.3.1 (b) (i))
Rear Registration plate insecure but not likely to fall off (0.1 (a))
all rear suspension components showing corrosion, unable to fully inspect due to underseal
all underside of vehicle showing corrosion
nearside and offside rear quarters corroded
ALL MBPs COVERED IN GREASE
Nearside SILL CORRODED
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside SILL CORRODED
REAR UNDERSIDE CORRODED
Front Fog lights not working
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Nearside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Nearside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Front Fog lights not working
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Both outer sills corroding but outside prescribed area
Front crossmember / radiator support corroded and weakened
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Both outer sills corroding but outside prescribed area
Front crossmember / radiator support corroded and weakened
Nearside Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp light intensity severely reduced (4.1.4 (a))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside sill slightly corroded
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear inner arch slightly corroded
Offside sill slightly corroded
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Suspension component mounting prescribed area is excessively corroded floor to sill (2.4.A.3)
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside sill slightly corroded
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear inner arch slightly corroded
Offside sill slightly corroded
Radiator support panel corroded
oil leak
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Rear Outer Tyre has ply or cords exposed sidewall (4.1.D.1b)
Offside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Radiator support panel corroded
headlamp patterns poor
oil leak
Corrosion to underside.
Front tyres low on edges.
Rear wheelarches corroding.
Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Corrosion to underside.
Front tyres low on edges.
Rear wheelarches corroding.
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Power steering ram(s) leaking from a failed seal (2.3.3b)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Stop lamp not working (1.2.1b)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Stop lamp not working (1.2.1b)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
All position lamps not working (1.1.A.3b)
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear fog lamp not working (1.3.2b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
ns wiper blade split
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Rear brake disc excessively pitted (3.5.1h)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Rear position lamp(s) incomplete (1.1.4a)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P125 HBC is a 2008 Mazda MPV in Black with a 1,998cc diesel engine. This vehicle has been through 24 MOT tests with a personal pass rate of 54.2%.
Across all 2008 Mazda MPV models, the average MOT pass rate is 65.5% with a typical mileage of 123,825 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying P125 HBC, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 18 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P125 HBC?
You can check the full history of P125 HBC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P125 HBC registered?
P125 HBC is a 2008 Mazda MPV, first registered on 1 July 2008.
Is P125 HBC safe to buy?
The MOT history for P125 HBC shows 24 tests with a 54.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P125 HBC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P125 HBC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.