1996 Citroen Zx

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

both front tyres wearing on edges.

handbrake outer cables poor.

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear registration plate deteriorated (6.3.1d)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Rear Braking system leaking (3.6.A.1) DANGEROUS

Nearside rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Offside Rear Braking system leaking (3.6.A.1) DANGEROUS

Offside rear brake recording little or no effort (3.7.B.5a) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

both front tyres wearing on edges.

handbrake outer cables poor.

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Offside Front Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Anti-roll bar linkage has slight play in a pin bearing (2.4.G.2)

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Headlamp not working on dipped beam (1.7.5a)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside rear brake application uneven (3.7.B.2)

Offside Headlamp aim too low (1.8)

Windscreen washer provides insufficient washer liquid (8.2.3)

Child seat fitted not allowing full inspection of adult belt

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Axle beam has slight vertical movement between stub axle and axle beam (2.5.A.1a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak

Rear registration plate delaminated but not likely to be misread (6.3.1d)

rear no plate starting to de-laminate

Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Headlamp not working on main beam (1.7.5a)

Oil leak