2008 Mazda Bongo

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner (6.1.1 (c) (i))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front D bush slight play

Rear Both rear D bushes slight play

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Central Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

exhaust system corroded

No rear seats fitted at time of test.

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp does not operate immediately when selected on main beam (1.7.4a)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Rear fog lamp emits a light other than red (1.3.2e)

No rear seats fitted at time of test.

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)