1997 Rover 416

Nearside Front Lower Suspension arm locating pin locking device missing (2.4.G.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

advise both front brake discd badly pitted

advise both rear brake discs badly pitted

advise nsr outer door handle broken

Nearside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear brake disc excessively pitted (3.5.1h)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Registration plate lamp not working (1.1.5c)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

unable to open n/s rear door from outside

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

front tyres worn on edges

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear nearside large suspension bush showing signs of wear

rear nearside large suspension bush showing signs of wear