1997 Ford Mondeo

Hazard warning switch faulty (1.4.B.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear coil spring broken (2.4.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear coil spring broken (2.4.C.1a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Parking brake: efficiency below requirements (3.7.B.7)

rear crossmember corroded

rear crossmember corroded

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too high (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

rear crossmember corroded

Front brake discs worn & corroded

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear cross member + ends + towing eye corroded eye will not tow

Bonnet retaining device ineffective (8.4.2)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front passenger door does not latch securely closed (6.2.B.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Headlamp aim too high (1.8)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear passenger door does not latch securely closed (6.2.B.1a)

Offside Rear rear brake grabbing severely (3.7.A.5b)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Registration plate lamp not working (1.1.C.1d)

Front brake discs worn & corroded

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear cross member + ends + towing eye corroded eye will not tow

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear bumper insecure

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Lower Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear bumper insecure

o/s/r wheel arch corroded.

petrol filler flap won't fasten.

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a part missing (7.1.1a)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Headlamp aim too low (1.8)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

o/s/r wheel arch corroded.

petrol filler flap won't fasten.

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Headlamp aim too low (1.8)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Registration plate lamp not working (1.1.5c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear bumper insecure

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not in good working order (function impaired) (1.1.4a)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Front and rear bumpers damaged

Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Slight bearing noise O/S/F area (suspect driveshaft support bearing)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake pipe excessively corroded (3.6.B.2c)

A lower speed rated tyre fitted to nearside rear

Front brake pads worn

Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)