1997 Mazda Bongo

Integral body structure inadequately repaired such that structural rigidity is significantly reduced Inadequate repairs front to rear throughout underside (6.1.1 (d) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheelarch (6.1.1 (c) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Centre sliding door step under vehicle (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill /wheel arch (6.1.1 (c) (i))

Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Throughout underside (6.1.1 (c) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced Welding in various places throughout underside and covered in underseal (6.1.1 (d) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced Throughout underside (6.1.1 (c) (i))

Nearside Front Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Out rigger (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))

Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Offside Front Outer Brake hose excessively twisted (1.1.12 (b) (ii))

Nearside Front Brake hose slightly damaged Ferrule corroded (1.1.12 (b) (i))

Nearside Front Windscreen wiper blade defective (3.4 (b) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Windscreen wiper blade defective (3.4 (b) (i))

exhaust system deteriorated

Offside Front Brake hose twisted (3.6.B.4c)

Offside Front Lower Suspension arm corroded and seriously weakened (2.4.G.1)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front suspension has a suspension lower ball joint securing nut not locked (2.5.B.1a)

Offside Rear Stop lamp not working (1.2.1b)

exhaust system deteriorated

Centre Rear Upper Stop lamp not working (1.2.1b)

Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Outer Rear Anti-roll bar attachment bracket/mounting weld cracked (2.4.G.1)

Outer Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

front crossmember badly corroded

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

front crossmember badly corroded

Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

offside front crossmember holed and corroded

slight brake bind nearside front

wipers slight smearing

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Passenger seat(s) missing at time of test

Exhaust has a major leak of exhaust gases (7.1.2)

Front Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.A.1)

Nearside Front An item not tested (Manual)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Passenger seat(s) missing at time of test

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)