2004 Ford Freda

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed (8.2.1.2 (d))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Front Electrical wiring insulation in such a condition there is an imminent risk of fire or formation of sparks (4.11 (c) (iii)) DANGEROUS

Coolant leak ()

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Shock absorbers has light misting of oil (5.3.2 (b))

Front Suspension rod pin or bush worn but not resulting in excessive movement Both o/side and n/side front wishbone bushes (5.3.4 (a) (i))

Front Windscreen washer not working (3.5 (a))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting Inner sill section holed (6.2.2 (d) (i))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength Front cross member (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Anti-roll bar attachment bracket/mounting likely to become detached Nut loose (5.3.3 (a) (ii)) DANGEROUS

Offside Front Anti-roll bar attachment bracket/mounting likely to become detached Nut missing (5.3.3 (a) (ii)) DANGEROUS

Front Suspension rod pin or bush worn but not resulting in excessive movement Both o/side and n/side front wishbone bushes (5.3.4 (a) (i))

Suspension components corroded

Vehicle body corroded

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sill various holes (6.1.1 (c) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

All suspension components corroded

Coolant leak ()

Vehicle body corroded

most components under van corroding

o/s/r corner under van starting to corrode but not in prescribed area

rear exhaust heat shield loose

rear seats and seatbelts not fitted at time of test

Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch(front) (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis,subframe mount (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch area,two corrosion holes (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))

Front Brake pipe corroded, covered in grease or other material both sides into brake hose (1.1.11 (c))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

both rear shock absorber covers corroded

front and rear suspension components heavily corroded

rear bumper corners loose

underside of vehicle corroded, various corrosion holes close and outside prescribed areas

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Rear fog lamp missing (4.5.1 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Suspension arm corroded but not seriously weakened all four arms (5.3.3 (b) (i))

Rear brake ferules starting to corrode

rear shocks dust covers cporroded

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is excessively corroded crossmember (2.4.A.3)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Front Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance (1.3.2d)

Offside Rear fog lamp not working (1.3.2b)

Front Suspension component mounting prescribed area is corroded but not considered excessive crossmember (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance (1.3.2d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Emissions not tested (7.0)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside rear brake binding (3.7.B.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Offside rear brake binding (3.7.B.1)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Rear Exhaust has a part missing (7.1.1a)

Both rear suspension bump stops, bonded rubber is missing.