2010 Mazda Bongo

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Bumper mountings corroded but not likely to become detached (6.1.4 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Lower outer panel corroded

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill in several areas (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill in several areas front to rear (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced A pillar (6.1.1 (c) (i))

Offside Front Service brake grabbing slightly (1.2.1 (c))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

os rear panel corroded

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Central Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper spring turret (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper spring turret (5.3.6 (a) (i))

Speedometer clearly inoperative (7.8 (b) (ii))

Exhaust tail pipe corroded

Nearside Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring turret (5.3.6 (a) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring turret (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring turret (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive coil spring turret (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint is slightly worn (2.5.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Exhaust has a minor leak of exhaust gases rear box to centre pipe joint (7.1.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill (6.1.B.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Front constant velocity joint is slightly worn (2.5.C.1b)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Front constant velocity joint is slightly worn (2.5.C.1b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Exhaust has a minor leak of exhaust gases rear box to centre pipe joint (7.1.2)

Nearside Rear Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Rear Inner Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Mechanical brake component has restricted free movement (3.5.1k)

Spare tyre defective

Nearside front brake application uneven (3.7.B.2)

Nearside rear brakes release unevenly (3.7.B.4)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside front brake application uneven (3.7.B.2)

Spare tyre defective

chassis corroding

front disc and pads worn pads boarder line pass

offside wheel arch corroding

Rear fog lamp tell tale not working (1.3.1b)

chassis corroding

front disc and pads worn pads boarder line pass

offside wheel arch corroding

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp not working (1.3.2b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear fog lamp missing (1.3.2a)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Tyre worn close to the legal limit (4.1.E.1)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

differant size tyres fitted between front and rear axles

nearside rear crossmember corroded

offside middle chassies corroded

rear suspension bump stops missing

wiper linkage assembly worn

BOTH FRONT BRAKE DISCS CORRODED

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

BOTH FRONT BRAKE DISCS CORRODED

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)