MOT Status
ExpiredMileage
140,415 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen wiper blade defective (3.4 (b) (i))
under body corroded
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced to rear inner sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced bumper (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced to rear inner sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced bumper (6.1.1 (c) (i))
underbody undersealed
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Emissions not tested (8.2.2.2 (e))
Headlamp aim not tested (4.1.2 (b))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Exhaust emits excessive smoke or vapour likely to obscure the vision of other road users (8.2.2.2 (c)) DANGEROUS
Central Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake pipe slightly corroded (3.6.B.2c)
all welding repairs must be seam welded uncovered and within 30cm of a testable item
corrosion around offside front inner chassis leg
o/s and n/s sills and inner sill are corroded
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Side repeater not working (1.4.A.2c)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pipe slightly corroded (3.6.B.2c)
all welding repairs must be seam welded uncovered and within 30cm of a testable item
o/s and n/s sills and inner sill are corroded
Centre Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
corrosion to rear valance
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Oil leak
Nearside Front Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Ball joint has excessive play (2.2.B.1f)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Registration plate lamp not working (1.1.C.1d)
Fuel system component leaking (7.2.3)
Horn not working (1.6.2a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Ball joint has slight play (2.2.B.1f)
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Inner Front Brake pipe excessively corroded (3.6.B.2c)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Front Brake pipe excessively corroded (3.6.B.2c)
Horn not working (1.6.2a)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Steering system has slight free play detected at steering wheel (2.2.A.1b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear Suspension has inadequate clearance with the bump stop (2.4.A.1a)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Steering system has slight free play detected at steering wheel (2.2.A.1b)
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P176 UHP is a 1997 Peugeot Boxer in White with a 2,446cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 1997 Peugeot Boxer models, the average MOT pass rate is 68.9% with a typical mileage of 61,798 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying P176 UHP, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 29 years old, this Peugeot Boxer is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P176 UHP?
You can check the full history of P176 UHP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P176 UHP registered?
P176 UHP is a 1997 Peugeot Boxer, first registered on 16 June 1997.
Is P176 UHP safe to buy?
The MOT history for P176 UHP shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P176 UHP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P176 UHP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.