1996 Mazda Bongo

reg plate broke front

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Horn not working (7.7 (a))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

reg plate broke front

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases rear joint, pipe into rear box corrioded. (6.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive o/s/r chassis (5.3.6 (a) (i))

n/s/r outer sill showing corrosion

Offside Rear Anti-roll bar attachment bracket/mounting fractured & bush missing (5.3.3 (b) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Exhaust has a minor leak of exhaust gases rear joint, pipe into rear box corrioded. (6.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive o/s/r chassis (5.3.6 (a) (i))

n/s/r outer sill showing corrosion

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Fuel system component leaking (6.1.3 (b) (i))

Front Windscreen washer not working (3.5 (a))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn drop link (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Outer Vehicle structure has slight corrosion sill (6.1.B.2)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Vehicle structure has slight corrosion sill (6.1.B.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Fuel system component leaking (7.2.3)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside front brake excessively fluctuating (3.7.B.3)

Oil leak

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

Offside Registration plate lamp not working (1.1.5c)

Emissions not tested (7.0)

Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Windscreen washer provides insufficient washer liquid (8.2.3)

n/s/r tyre splitting

Rear Brake pad(s) wearing thin (3.5.1g)