1997 Rover 420

tape applied to sharpe edges at time of test

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

tape applied to sharpe edges at time of test

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

o/s/f brake pipe union corroded

spare wheel missing

tape applied to sharpe edges at time of test

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

o/s/f brake pipe union corroded

spare wheel missing

vehile has tape applied to sharpe edges at timtr of test

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both front tyres wearing on inner edge

sharp edges on body tapped up at time of test

sill covers fitted at time of test

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

holes in body tapped up at time of test

sill covers fitted at time of test

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake hose has slight corrosion to ferrules (3.6.B.4e)

Front Brake pipe slightly corroded (3.6.B.2c)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Rear Brake pipe slightly corroded (3.6.B.2c)

holes in body tapped up at time of test

sill covers fitted at time of test

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

rust on bonnet but not sharp at time oftest

sill covers fitted at time of test

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear Lower Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

sill covers fitted at time of test

Nail in offside rear tyre

Nearside Rear Upper Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Upper Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Emissions not tested (7.0)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Stop lamp not working (1.2.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Registration plate lamp not working (1.1.5c)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen wiper blade deteriorated (8.2.2)

Exhaust emits clearly visible black smoke during acceleration (7.4.A2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Offside Front constant velocity joint gaiter split (2.5.C.1a)