MOT Status
ValidMileage
182,766 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Service brake binding but not excessively Both (1.2.1 (f))
Nearside Rear Exhaust has a minor leak of exhaust gases Silencer (6.1.2 (a))
Offside Rear Anti-roll bar attachment bracket/mounting damaged but its strength is not seriously reduced (5.3.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is repaired but structural rigidity is not significantly reduced Nearside and offside front to rear inner sills (6.1.1 (d) (i))
Both inner sills corroded front to rear
Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Both inner sills corroded front to rear
Front Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement Both D bushes (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Outer sill has slight corrosion
slight play in front anti roll bar d bushes
handbrake travel high
Both outer sills damaged
Glow plug light flashing
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear seats not fitted
Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush (2.4.G.2)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Nearside Rear Tyre has ply or cords exposed inner edge (4.1.D.1b)
Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement D bush (2.4.G.2)
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Rear fog lamp excessively damaged so that it is not visible from a reasonable distance showing white light (1.3.2d)
Offside Rear Rear fog lamp insecure (1.3.2a)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Shock absorber has slight corrosion to the casing both sides (2.7.2a)
Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Rear fog lamp not working (1.3.2b)
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Shock absorber has slight corrosion to the casing both sides (2.7.2a)
oil leak
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)
Front Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Fuel pipe/s corroded
Passenger seat(s) missing at time of test
rear wiper insecured
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Front Headlamp aim too high (1.8)
Offside Front Body has a sharp edge caused by damage (6.1.C.1)
Offside Inner Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Fuel pipe/s corroded
Passenger seat(s) missing at time of test
rear wiper insecured
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear fog lamp not working (1.3.2b)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear fog lamp not working (1.3.2b)
front headlight lenses disscoloured offside headlight light output becoming poor
Offside Steering rack gaiter split (2.2.D.2d)
Service brake application uneven across the axle (3.7.D.2b)
front headlight lenses disscoloured offside headlight light output becoming poor
both headlamp beam patterns deteriating.
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust has a part missing (7.1.1a)
both headlamp beam patterns deteriating.
Child seat fitted not allowing full inspection of adult belt
How Reliable is the Mazda Bongo Friendee?
Based on 13,340 MOT tests across 1,062 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P190 AHO is a 1997 Mazda Bongo Friendee in Blue with a 2,490cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 1997 Mazda Bongo Friendee models, the average MOT pass rate is 67.9% with a typical mileage of 125,334 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo Friendee fails its MOT is fog lamp not working, accounting for 259 recorded failures. If you're considering buying P190 AHO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo Friendee typically stays on UK roads for around 31 years. At 29 years old, this Mazda Bongo Friendee is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P190 AHO?
You can check the full history of P190 AHO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P190 AHO registered?
P190 AHO is a 1997 Mazda Bongo Friendee, first registered on 31 December 1997.
Is P190 AHO safe to buy?
The MOT history for P190 AHO shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P190 AHO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P190 AHO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.