2007 Mazda Bongo

Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced bumper mount (6.1.1 (c) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassie leg (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch (6.1.1 (c) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Central Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CROSS MEMBER (6.1.1 (c) (i))

Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT TO REAR (6.1.1 (c) (i))

Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT TO REAR (6.1.1 (c) (i))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT TO REAR (6.1.1 (c) (i))

Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT TO REAR (6.1.1 (c) (i))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Fluid leak, but not excessive Coolant (8.4.1 (a) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)

Vehicle underside showing signs of corrosion.

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Suspension joint nearside lower dust cover split/missing

Suspension joint offside lower dust cover split/missing