1997 Mazda Bongo

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Coil spring corroded both (5.3.1 (b) (i))

under body undersealed

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

all underside coated in a thick black tar coating

front lower radiator support bracket corroded

Nearside sill corroded

Offside sill corroded

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill holed (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside sill corroded

Suspension component mounting prescribed area is corroded but not considered excessive under body corroded (5.3.6 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive under body corroded (5.3.6 (a) (i))

Coolant leak ()

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Mechanical brake component has restricted free movement (3.5.1k)

Coolant leak ()

Live wire hanging close to near side front suspension arm

Horn not working (1.6.2a)

Nearside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside front brake binding (3.7.B.1)

Offside Front Front position lamp(s) incorrect colour (1.1.A.3e)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside front brake binding (3.7.B.1)

Rear fog lamp insecure (1.3.2a)

Rear fog lamp not working (1.3.2b)

Live wire hanging close to near side front suspension arm

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Tyre tread depth below requirements of 1.6mm both rear (4.1.E.1)

front brake binding both front (3.7.B.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

rear tail pipe missing

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

engine oil leak

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Outer Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Outer Front Anti-roll bar has slight play in a ball joint (2.4.G.2)

Nearside Outer Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Outer Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Centre Rear registration plate with character(s) which are not the correct height (6.3.4a)