MOT Status
ValidMileage
253,472 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Engine mounting damaged or deteriorated resulting in excessive movement Lower gearbox mount (6.1.8 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Crossmember above exhaust (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Split (6.1.7 (g) (ii))
Offside Rear Leaf spring fractured (5.3.1 (b) (i))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt split (6.1.7 (g) (ii))
Nearside Rear Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Offside Front Suspension arm insecurely attached Rear mount bolt loose (5.3.3 (a) (i))
Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill (7.1.1 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Brake pipe corroded, covered in grease or other material Front to rear (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Rear Exhaust has a major leak of exhaust gases Tailpipe (6.1.2 (a))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt inner boot (6.1.7 (g) (ii))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm insecurely attached rear bolt loose (5.3.3 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Service brake excessively fluctuating (1.2.1 (e))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Fuel tank heatshield insecure
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt inner boot (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength anti roll bar mount crossmember (5.3.6 (a) (i))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Exhaust has a minor leak of exhaust gases front joint (6.1.2 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn drop link (5.3.4 (a) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Brake pipe excessively corroded side of fuel tank (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Anti-roll bar linkage ball joint has slight play drop link (5.3.4 (a) (i))
Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Central Body component likely to become detached exhaust heat shield (6.2.1 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Rear Exhaust system insecure (6.1.2 (a))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Upper Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Oil leak
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Oil leak
Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Front Headlamp aim too low (1.8)
Nearside Front Registration plate lamp not working (1.1.C.1d)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Centre Stop lamp not working (1.2.1b)
Nearside Headlamp aim too high and too far to the left. (1.8)
Nearside Stop lamp not working (1.2.1b)
Offside Headlamp aim too high (1.8)
Parking brake lever has no reserve travel (3.1.6b)
How Reliable is the Ford Transit Connect?
Based on 3,622,068 MOT tests across 283,952 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P1 OTB is a 2005 Ford Transit Connect in White with a 1,753cc diesel engine. This vehicle has been through 31 MOT tests with a personal pass rate of 58.1%.
Across all 2005 Ford Transit Connect models, the average MOT pass rate is 66.7% with a typical mileage of 102,650 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit Connect fails its MOT is registration plate lamp not working, accounting for 121,813 recorded failures. If you're considering buying P1 OTB, it's worth having these areas checked by a mechanic before committing.
The Ford Transit Connect typically stays on UK roads for around 24 years. At 21 years old, this Ford Transit Connect is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P1 OTB?
You can check the full history of P1 OTB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P1 OTB registered?
P1 OTB is a 2005 Ford Transit Connect, first registered on 22 December 2005.
Is P1 OTB safe to buy?
The MOT history for P1 OTB shows 31 tests with a 58.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P1 OTB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P1 OTB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.