MOT Status
ExpiredMileage
287,631 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security radiator support panel (6.2.2 (d) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security radiator support panel (6.2.2 (d) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
N/S/F link bar slight movement
Steering rack damp
p/s pump damp
Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides at front (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting at tow bar mounting points (6.2.2 (d) (i))
N/S inner sill holed in middle
N/S/F link bar slight movement
Steering rack damp
p/s pump damp
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (marked with chalk) (6.1.1 (c) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Power steering component(s) has slight seepage from a component (2.3.3b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
surface rust present on the underside
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Power steering component(s) leaking steering rack (2.3.3b)
Power steering pipe(s) or hose(s) leaking from a joint (2.3.3b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
brakes tapley tested only,oil leak,rear exhaust coroded,steering rack area damp.
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
brakes noisy/tapley tested,oil leak,exhaust coroded,steering rack area damp.
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
brakes tapley tested,rear inner sills/suspension perscribed areas,spring platforms all coroded,suspension bushes perished,oil leak,
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front inner c.v boots deteriorated,rear crossmember/rear sills corroded
Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
both rear sills
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear fog lamp insecure (1.3.2a)
Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
both rear sills
tested wet.brakes tapley tested only.wheel bearings not tested properly,suspension bushes worn.
Body has slight corrosion (6.1.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear fog lamp insecure (1.3.2a)
Offside Rear fog lamp not working (1.3.2b)
Body has slight corrosion (6.1.B.2)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Body has slight corrosion (6.1.B.2)
Offside Body has slight corrosion (6.1.B.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
both outer sills rusty not holed at time of test
Child seat fitted not allowing full inspection of adult belt
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Rear fog lamp insecure (1.3.2a)
Offside Rear Rear fog lamp not working (1.3.2b)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Child seat fitted not allowing full inspection of adult belt
Child seat fitted not allowing full inspection of adult belt
Headlamp masks/converters fitted
Oil leak
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
fog light loose
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P213 AHO is a 2005 Mazda Bongo in Black with a 2,490cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2005 Mazda Bongo models, the average MOT pass rate is 66.8% with a typical mileage of 133,806 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P213 AHO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 21 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P213 AHO?
You can check the full history of P213 AHO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P213 AHO registered?
P213 AHO is a 2005 Mazda Bongo, first registered on 9 November 2005.
Is P213 AHO safe to buy?
The MOT history for P213 AHO shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P213 AHO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P213 AHO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.