1997 Mercedes-benz Vito

Nearside and offside front bumper mounts excessively corroded

Nearside and offside outer sills slightly corroded

Nearside and offside rear inner sills corroded and covered in underseal

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Jacking point slightly corroded

Offside Rear Shock absorber protector broken and is loose around shock absorber

Rear vehicle structure slightly corroded

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Position lamp slightly affected by the operation of another lamp affected by main beam operation (4.2.3 (c))

Nearside and offside front bumper mounts excessively corroded

Nearside and offside outer sills slightly corroded

Nearside and offside rear inner sills corroded and covered in underseal

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Jacking point slightly corroded

Offside Rear Shock absorber protector broken and is loose around shock absorber

Rear vehicle structure slightly corroded

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

front exhaust bracket corroded

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Brake hose slightly chafed (1.1.12 (b) (i))

Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Coil spring corroded (5.3.1 (b) (i))

Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

front exhaust bracket corroded

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill / sill back (5.3.6 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated starting to fail at inner clamp (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output dampness inside headlamp unit (4.1.4 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated starting to fail at inner clamp (6.1.7 (g) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output dampness inside headlamp unit (4.1.4 (b))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

main beam tell tail light on all time lights on

Horn not working (7.7 (a) (ii))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Other passenger door cannot be opened from outside the vehicle (6.2.3 (a))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Windscreen washer not working (3.5 (a))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

main beam tell tail light on all time lights on

Nearside Front Lower Anti-roll bar linkage ball joint has slight play drop link bar (5.3.4 (a) (i))

exhaust bodyshileds loose on there fixings

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

engine covers fitted

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear coil spring corroded (2.4.C.1b)

front tyres cracking

Horn not working (1.6.2a)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Rear coil spring corroded (2.4.C.1b)

front tyres cracking

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Horn not working (1.6.2a)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front and rear brake discs corroded

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside front tyre sidewall perished but not exposing ply or cord

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside headlamp moisture in unit

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Centre Exhaust mounting missing (7.1.1b)

Centre Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Rear brake disc slightly pitted (3.5.1h)

Rear brake disc slightly pitted (3.5.1h)