1997 Mazda MX-3

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))

Offside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Seat belt slightly damaged (7.1.2 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Emissions not tested (8.2.1.2 (d))

Front Exhaust system insecure (6.1.2 (a))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor (5.3.6 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material brake pipe slightly corroded running down ns of underbody ,brake pipe at rear os next to flexi connection corroded. (1.1.11 (c))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Brake pipe corroded, covered in grease or other material brake pipe slightly corroded running down ns of underbody ,brake pipe at rear os next to flexi connection corroded. (1.1.11 (c))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Steering locking device missing Track rod end nut (2.1.3 (d))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Inner sill (5.3.6 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Middle exhaust mounting missing

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill (2.4.A.3)

Rear Exhaust system not adequately supported Silencer (7.1.1)

Middle exhaust mounting missing

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

Body has slight corrosion both ns and os sills at rear showing signs of corrosion (6.1.B.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Registration plate lamp not working (1.1.C.1d)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

light scratches screen

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

light scratches screen

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Centre Exhaust mounting missing (7.1.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Front registration plate background overprinted or shadowed with text (6.3.1e)

Rear registration plate background overprinted or shadowed with text (6.3.1e)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Centre Exhaust mounting missing (7.1.1b)

Front Exhaust system not adequately supported (7.1.1)

Offside Front brake disc excessively pitted (3.5.1h)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside front brake application uneven (3.7.B.2)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Front Brake pad(s) wearing thin (3.5.1g)

Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)