MOT Status
ValidMileage
113,777 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Horn not working (7.7 (a))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Top strut mounting. (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Suspension component pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Front Suspension component pin or bush slightly worn D bush (5.3.4 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced Centre, sill (6.1.1 (c) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Windscreen wiper blade defective (3.4 (b) (i))
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Horn not working (1.6.2a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)
Offside Headlamp not working on main beam (1.7.5a)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
offside horn button inoperative
offside rear suspension arm, front mounting point fouling attatchment
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Subframe mounting prescribed area is excessively corroded cross member (2.4.A.3)
Stop lamp not working all (1.2.1b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
offside horn button inoperative
offside rear suspension arm, front mounting point fouling attatchment
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nail in offside rear tyre
offside horn button inop
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded shock mount/inner wing (2.4.A.3)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Stop lamp not working all (1.2.1b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
nail in offside rear tyre
offside horn button inop
Items removed from driver's view prior to test
Nail in offside rear tyre
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
n/s inner wing corroded
o/s outer sill corroded
o/s/r tyre cracking
Items removed from driver's view prior to test
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
front and rear pads look low
n/s/f bottom ball joint gaitor perishing
o/s track rod end gaitor perishing
underbody starting to corrode
Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Items removed from driver's view prior to test
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
front and rear pads look low
n/s/f bottom ball joint gaitor perishing
o/s track rod end gaitor perishing
underbody starting to corrode
Nail in offside rear tyre
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P240 KBC is a 2006 Mazda Bongo in Black with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 74.1%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P240 KBC, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P240 KBC?
You can check the full history of P240 KBC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P240 KBC registered?
P240 KBC is a 2006 Mazda Bongo, first registered on 4 October 2006.
Is P240 KBC safe to buy?
The MOT history for P240 KBC shows 27 tests with a 74.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P240 KBC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P240 KBC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.