2013 Mazda Bongo

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened Both discs (1.1.14 (a) (ii))

Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened Both discs (1.1.14 (a) (ii))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under rad (6.2.2 (d) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under sill inner (6.2.2 (d) (i))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Behind bumper (6.1.1 (c) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Inner Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Under rad (6.2.2 (d) (i))

Central Front Items removed from driver's view prior to test ()

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Valve stem slightly damaged (5.2.3 (j))

Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Lower Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Rear Brake disc worn, pitted or scored, but not seriously weakened Both rear discs (1.1.14 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Windscreen wiper blade defective Both (3.4 (b) (i))

Anti-lock braking system warning lamp does not illuminate (1.6 (a))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Chassis (6.1.1 (c) (i))

Windscreen wiper blade defective Both (3.4 (b) (i))

battery insecure

front discs worn not excessive

rear discs pitted not excessive

Front Windscreen washer not working (3.5 (a))

battery insecure

front discs worn not excessive

rear discs pitted not excessive

Corrosion on both rear chassis rails

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Poor beam image on both headlamp aims

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear fog lamp does not emit a steady red light showing white light (4.5.4 (a))

Offside Steering rack gaiter missing or no longer prevents the ingress of dirt split (2.1.3 (g) (ii))

Corrosion on both rear chassis rails

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Poor beam image on both headlamp aims

Nearside Rear Tyre worn close to the legal limit and perished (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)