1997 Ford Mondeo

Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

general corrosion on underbody & sills

nearside rear tyre feather on inside edge

offside lower suspension arm bushes splitting

Inner Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Registration plate lamp not working (1.1.5c)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

general corrosion on underbody & sills

nearside rear tyre feather on inside edge

offside lower suspension arm bushes splitting

n/d front wiper blade starting to split

rear silencer tailpipes corroded - in poor condition

slight corrosion - brake pipes to o/s + n/s rear flexy hoses

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Rear Brake pipe inadequately clipped (3.6.B.1)

front brake application uneven (3.7.B.2)

n/d front wiper blade starting to split

o/s + n/s front brake discs in poor condition - worn

rear silencer tailpipes corroded - in poor condition

slight corrosion - brake pipes to o/s + n/s rear flexy hoses

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Rear Brake hose excessively damaged (3.6.B.4d)

Nearside Rear Brake hose has insufficient room to move, resulting in fouling on any part (3.6.B.4a)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Brake pipe slightly corroded (3.6.B.2c)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front suspension has slight play in a pin or bush of an lower wishbone inner bearing (2.5.B.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Anti-roll bar corroded but not seriously weakened (2.4.G.1)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front coil spring incomplete (2.4.C.1a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Parking brake: efficiency below requirements (3.7.B.7)

Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front front brake juddering slightly (3.7.A.2b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)