1997 Yamaha XJ600

Nearside Drive chain slightly loose (6.1.7 (c) (i))

Nearside Drive chain worn but not considered excessive (6.1.7 (c) (i))

Nearside Front Shock absorber has a reduced damping effect (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a reduced damping effect (5.3.2 (b))

Offside Rear Exhaust noisy (8.1.1 (a))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Nearside Rear Drive chain worn but not considered excessive (6.1.7 (c) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front wheel bearings are slightly rough (2.3.5b)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Brake reaction bracket insecure (3.2.A1j)

Registration plate insecure (6.3.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Brake locking device missing (3.2.A1e) DANGEROUS

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake component has restricted free movement and operation is likely to be impeded (3.2.A1h)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Nearside Exhaust is leaking but is not excessively noisey (7.1.1b)