MOT Status
ValidMileage
222,778 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Front Hydraulic leak, but not excessive steering rack (8.4.1 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement D Bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Coolant leak
Offside Rear handbrake reading lower than n/s adjustment??
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp light intensity severely reduced (4.1.4 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Coolant leak
Offside Rear handbrake reading lower than n/s adjustment??
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
RADIATOR SUPPORT CORRODED
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SILL (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
RADIATOR SUPPORT CORRODED
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Central Seat belt buckle not functioning as intended (7.1.2 (d))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Horn sound not in accordance with requirements (7.7 (c))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside sil slightlt corroded.
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside inner and outer sil slightly corroded.
Offside wiper arm loose.
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
fog light loose
Offside Front Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside sil slightlt corroded.
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside inner and outer sil slightly corroded.
Offside wiper arm loose.
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
fog light loose
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger (5.3.6 (a) (i))
Rear fog lamp insecure (4.5.1 (c) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive out rigger (5.3.6 (a) (i))
Rear fog lamp insecure (4.5.1 (c) (i))
Corrosion to rear off side sill.
Import style on rear No.plate.
Upright insecure on rear facing seats & seatbelt trapped.
Central Stop lamp not working (1.2.1b)
Central Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Battery insecure (1.9.1)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Corrosion to rear off side sill.
Import style on rear No.plate.
Upright insecure on rear facing seats & seatbelt trapped.
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside front brake binding (3.7.B.1)
Rear registration plate insecure (6.3.1b)
Suspension component mounting prescribed area is excessively corroded front cross member (2.4.A.3)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. 28% (3.7.B.5b)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside front brake binding (3.7.B.1)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Oil leak
Engine covers fitted obscuring some components in the engine bay
Under-trays fitted obscuring some underside components
Engine covers fitted obscuring some components in the engine bay
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Under-trays fitted obscuring some underside components
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P255 FWP is a 1997 Mazda Bongo in White with a 2,490cc diesel engine. This vehicle has been through 30 MOT tests with a personal pass rate of 63.3%.
Across all 1997 Mazda Bongo models, the average MOT pass rate is 66.3% with a typical mileage of 131,832 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P255 FWP, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 29 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P255 FWP?
You can check the full history of P255 FWP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P255 FWP registered?
P255 FWP is a 1997 Mazda Bongo, first registered on 31 December 1997.
Is P255 FWP safe to buy?
The MOT history for P255 FWP shows 30 tests with a 63.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P255 FWP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P255 FWP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.