MOT Status
ExpiredMileage
84,724 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
All underbody corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear chassis section excessively corroded but not within prescribed area.
Offside Rear floor section excessively corroded but not within prescribed area.
Supplementary restraint system warning lamp does not illuminate (7.1.6 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassies (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear boot floor hold
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Rear Panel excessively corroded but not within prescribed area.
Rear floor section excessively corroded but not within prescribed area.
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor section (7.1.1 (a) (i))
Offside Brake pipe excessively corroded at floor section (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Panel excessively corroded but not within prescribed area.
Rear floor section excessively corroded but not within prescribed area.
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Brake pipe corroded, covered in grease or other material two at floor section (1.1.11 (c))
Offside Rear chassis section excessively corroded but not within prescribed area.
Offside Rear floor section excessively corroded but not within prescribed area.
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive floor section (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis section (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Brake pipe corroded, covered in grease or other material two at floor section (1.1.11 (c))
Offside Rear chassis section excessively corroded but not within prescribed area.
Offside Rear floor section excessively corroded but not within prescribed area.
Offside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive floor section (5.3.6 (a) (i))
Central Brake pipe slightly corroded at floor panel (3.6.B.2c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear boot floor corroded
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a)
Central Brake pipe slightly corroded at floor panel (3.6.B.2c)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear boot floor corroded
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Offside Brake pipe slightly corroded two at floor section (3.6.B.2c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear floor section excessively corroded but not within prescribed area
Rear Suspension component mounting prescribed area is corroded but not considered excessive floor section (2.4.A.3)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
Nearside Front Subframe mounting prescribed area is excessively corroded floor section (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded two at floor section (3.6.B.2c)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear floor section excessively corroded but not within prescribed area
Rear Suspension component mounting prescribed area is corroded but not considered excessive floor section (2.4.A.3)
Supplementary Restraint System warning lamp does not illuminate (5.4.2)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front front suspension bush slightly deteriorated
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded two at floor (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)
Offside Rear floor section excessively corroded but not within prescribed area
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside rear brake binding (3.7.B.1)
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front front suspension bush slightly deteriorated
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Brake pipe slightly corroded two at floor (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (2.4.A.3)
Offside Rear floor section excessively corroded but not within prescribed area
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Brake fluid warning lamp illuminated (3.6.G.2)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear brake binding (3.7.B.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Centre Rear Seat belt locking mechanism does not secure or release (5.2.5a)
Indicator tell tale inoperative (1.4.A.2a)
Offside rear brake binding (3.7.B.1)
rear brake application uneven (3.7.B.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
nearside front tyre worn on outer edge
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside rear brake binding (3.7.B.1)
rear brake application uneven (3.7.B.2)
nearside front tyre worn on outer edge
offside rear brake slightly binding
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front coil spring fractured (2.4.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
offside rear brake slightly binding
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp not working (1.1.5c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Mondeo?
Based on 12,239,875 MOT tests across 1,205,291 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P255 JSP is a 1997 Ford Mondeo in Blue with a 1,796cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 1997 Ford Mondeo models, the average MOT pass rate is 63.7% with a typical mileage of 106,251 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Mondeo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 610,562 recorded failures. If you're considering buying P255 JSP, it's worth having these areas checked by a mechanic before committing.
The Ford Mondeo typically stays on UK roads for around 33 years. At 29 years old, this Ford Mondeo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P255 JSP?
You can check the full history of P255 JSP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P255 JSP registered?
P255 JSP is a 1997 Ford Mondeo, first registered on 16 January 1997.
Is P255 JSP safe to buy?
The MOT history for P255 JSP shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P255 JSP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P255 JSP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.