MOT Status
ExpiredMileage
185,741 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill - subframe area (5.3.6 (a) (i))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Offside Front Power steering component leaking from steering rack end (2.1.5 (a))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill - subframe area (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis channel above axle (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Power steering component has slight seepage from a component steering rack input shaft (2.1.5 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Power steering component has slight seepage from a component steering rack input shaft (2.1.5 (a))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Power steering component leaking steering rack input seal (2.1.5 (a))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Offside Side repeater not working (4.4.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Power steering component(s) has slight seepage from a seal steering rack (2.3.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords inner wall (4.1.D.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Headlamp deteriorated but light output not reduced (1.7.5a)
Power steering component(s) has slight seepage from a seal steering rack (2.3.3b)
Engine covers fitted obscuring some components in the engine bay
Horn not working (1.6.2a)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Engine covers fitted obscuring some components in the engine bay
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Rear fog lamp not working (1.3.2b)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Power steering component(s) has slight seepage from a component (2.3.3b)
both headlight outputs slightly reduced
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Power steering component(s) has slight seepage from a component (2.3.3b)
both headlight outputs slightly reduced
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Centre Exhaust has part of the system excessively deteriorated (7.1.1a)
Horn not working (1.6.2a)
Nearside Obligatory mirror insecure (8.1.1)
Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)
Offside Obligatory mirror insecure (8.1.1)
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear fog lamp not working (1.3.2b)
Offside Stop lamp not working (1.2.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Rear fog lamp missing (1.3.2a)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P265 AHO is a 2006 Mazda Bongo in Red with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 59.3%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P265 AHO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P265 AHO?
You can check the full history of P265 AHO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P265 AHO registered?
P265 AHO is a 2006 Mazda Bongo, first registered on 23 February 2006.
Is P265 AHO safe to buy?
The MOT history for P265 AHO shows 27 tests with a 59.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P265 AHO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P265 AHO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.