2004 Mazda Bongo

both rear wheel arches corroded

underside corrosion

both rear arches corroded

patches of corrosion

underside corrosion

underside corrosion

Nearside Inner sill patches of heavy corrosion

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.A.1)

patches of corrosion

patches of corrosion

Anti-lock braking system warning lamp does not illuminate (3.4.1b)

Fuel system component leaking injection pump area (7.2.3)

Nearside Front Anti-lock braking system component missing wheel speed sensor (3.4.2)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp not working (1.3.2b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Anti-roll bar linkage has slight play in a ball joint both fronts (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)

Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Rear axle noisy

front wiperblades slightly smearing

Front Subframe mounting prescribed area is excessively corroded lower crossmember corroded and holed in number of places (2.4.A.3)

Nearside Front Headlamp aim beam image obviously incorrect lense deteriorated (1.8.A.1b)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Subframe mounting prescribed area is excessively corroded inner arch (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded inner and outer body sills (2.4.A.3)

Rear axle noisy

o/s/f headlight lense deteriorating

Anti-roll bar linkage has slight play in a ball joint both fronts (2.4.G.2)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Inner Subframe mounting prescribed area is corroded but not considered excessive arch (2.4.A.3)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

centre rear seats missing

chip in windscreen o/s/f

Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

centre rear seats missing

chip in windscreen o/s/f

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

middle seat row missing/ not fitted

Nearside Front position lamp(s) incorrect colour (1.1.A.3e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front position lamp(s) incorrect colour (1.1.A.3e)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear fog lamp not working (1.3.2b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

middle seat row missing/ not fitted

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Nearside Headlamp aim too low (1.8)

Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear fog lamp not working (1.3.2b)

Horn not working (1.6.2a)

Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)