MOT Status
ValidMileage
117,449 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
heavily wax oiled
heavily welded
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
heavily wax oiled
heavily welded
heavily wax oiled
heavily welded
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
corrosion present in vehicle body and structure
extensive corrosion repairs and underbody covered in underseal
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
corrosion present in vehicle body and structure
extensive corrosion repairs and underbody covered in underseal
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
front to rear under vehicle heavily under sealed
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
offside rear under-sill panel corroded not in prescribed area
vehicle has been extensively repaired and heavily under-sealed
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm (5.3.4 (a) (i))
fuel lines slightly corroded
offside rear under-sill corrode not in prescribed area
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))
Fluid leak harmful to the environment or a risk to other road users coolant (8.4.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail out rigger (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor in several places (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Tyre has ply or cords exposed perished (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Suspension arm pin or bush worn but not resulting in excessive movement rear trailing arm (5.3.4 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive floors,sills,sill to floors,chassis rails,sub-frames,inner flitches ,boot floor ,suspension arms and various other components (5.3.6 (a) (i))
fuel lines slightly corroded
offside rear under-sill corrode not in prescribed area
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Brake pipe inadequately clipped or supported to offside rear (1.1.11 (d) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Fuel cap/sealing device ineffective none sealing / locking type (6.1.3 (b) (i))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Brake cable damaged frayed / disconected (1.1.15 (a))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
bonnet safety catch seized
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Central Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Fuel cap/sealing device missing (7.2.4a)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Anti-roll bar linkage missing (2.4.G.1)
Nearside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front coil spring broken (2.4.C.1a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Suspension arm corroded and seriously weakened (2.4.G.1)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear coil spring corroded (2.4.C.1b)
fuel pipe coroded
Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside and offside rear tyres perished (ADVISE TO CHANGE)
Nearside and offside rear wheel archs corroded
Nearside rear tyre wearing on edge
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Stop lamp not working (1.2.1b)
Rear Brake pipe slightly corroded (3.6.B.2c)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Side skirts on sills
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
coil spring corroded (2.4.C.1b)
Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside and offside rear tyres perished (ADVISE TO CHANGE)
Nearside and offside rear wheel archs corroded
Nearside rear tyre wearing on edge
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Outer Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pipe slightly corroded (3.6.B.2c)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Side skirts on sills
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
coil spring corroded (2.4.C.1b)
Nearside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar insecure (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Brake pipe slightly corroded (3.6.B.2c)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front coil spring corroded (2.4.C.1b)
extensive underbody surface corrosion
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
coil spring corroded (2.4.C.1b)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Brake pipe slightly corroded (3.6.B.2c)
coil spring corroded (2.4.C.1b)
Brake pipe excessively corroded (3.6.B.2c)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Offside Rear Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
oil leak(cylinder head)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
How Reliable is the Mitsubishi Fto?
Based on 55,254 MOT tests across 5,410 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P282 JBC is a 2000 Mitsubishi Fto in Silver with a 2,000cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 52.2%.
Across all 2000 Mitsubishi Fto models, the average MOT pass rate is 64.3% with a typical mileage of 106,389 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Fto fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,056 recorded failures. If you're considering buying P282 JBC, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Fto typically stays on UK roads for around 32 years. At 26 years old, this Mitsubishi Fto is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P282 JBC?
You can check the full history of P282 JBC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P282 JBC registered?
P282 JBC is a 2000 Mitsubishi Fto, first registered on 1 September 2000.
Is P282 JBC safe to buy?
The MOT history for P282 JBC shows 23 tests with a 52.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P282 JBC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P282 JBC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.