2006 Mazda Bongo

All direction indicators not working (4.4.1 (a) (ii))

Front Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))

Hazard warning lamps inoperative (4.4.1 (e))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Under bonnet (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Steering Rack (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength out rigger and inner sill (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect lens deteriorating (4.1.2 (c))

Nearside Rear Brake pipe excessively corroded on axle (1.1.11 (c))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect lens deteriorating (4.1.2 (c))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner arch (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Nail in tyre ()

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement bushes deteriorating (5.3.4 (a) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Suspension component mounting prescribed area is corroded but not considered excessive offside and nearside chassis legs (5.3.6 (a) (i))

offside outer sill going rusty (outside prescribed area)

Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

both headlight lenses deterited

Nearside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Body panel corroded and likely to cause injury (6.2.1 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

both headlight lenses deterited

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

offside and nearside inner sills rusty (outside prescribed area)

offside and nearside rear chassis legs going very rusty

offside and nearside rear inner arches going rusty behind wheels

offside and nearside rear outer arches going rusty

offside front brake dragging slightly

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect headlamp deteriorated (4.1.2 (c))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and out rigger (5.3.6 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect headlamp deteriorating (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired outer sill (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive engine (8.4.1 (a) (i))

offside and nearside inner sills rusty (outside prescribed area)

offside and nearside rear chassis legs going very rusty

offside and nearside rear inner arches going rusty behind wheels

offside and nearside rear outer arches going rusty

offside front brake dragging slightly

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive rear chassis starting to corrode (2.4.A.3)

Nearside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)

Rear Rear fog lamp not working (1.3.2b)

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (2.4.A.3)

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive and outer sills (2.4.A.3)

Suspension component mounting prescribed area is corroded but not considered excessive rear chassis starting to corrode (2.4.A.3)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Inner Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Rear fog lamp not working (1.3.2b)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Outer Body has a sharp edge caused by corrosion (6.1.C.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Suspension arm has slight play in a pin/bearing (2.4.G.2)

offside front inner sill corroded outside the perscribed area

rear sills and chassis corroding

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension arm has slight play in a pin/bearing (2.4.G.2)

offside front inner sill corroded outside the perscribed area

rear sills and chassis corroding

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front crossmember is corroded

inner sills corroding

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front crossmember is corroded

inner sills corroding