MOT Status
ExpiredMileage
179,207 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material Across rear axle (1.1.11 (c))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Wheel arch corroded near fuel filler
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Central inner sill (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Central Coolant leak ()
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
rear arches corroded
Nearside Front Outline marker lamp not working (4.2.1 (a))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
rear arches corroded
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
both rear brake discs slightly pitted
exhaust deteriorated
n/s/f brake has slight bind
o/s/f brake has slight bind
underside of vehicle slightly corroded
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
both rear brake discs slightly pitted
exhaust deteriorated
n/s/f brake has slight bind
o/s/f brake has slight bind
underside of vehicle slightly corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive forward mount (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive forward mount (2.4.A.3)
all brake discs slightly pitted
o/s/f brake slight bind
underside of vehicle slightly corroded
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive forward mount (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive forward mount (2.4.A.3)
all brake discs slightly pitted
o/s/f brake slight bind
underside of vehicle slightly corroded
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake pipe excessively corroded rear axle (3.6.B.2c)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
temp repair to rear anti roll bar inner bushs
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Rear Statutory seat belt missing (5.1.1)
Brake hose has slight corrosion to ferrules (3.6.B.4e)
temp repair to rear anti roll bar inner bushs
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Subframe mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Front Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front crossmember corroded NSR tyre sidewall perished/cracked
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Front crossmember corroded NSR tyre sidewall perished/cracked
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Track rod end ball joint dust cover damaged, but preventing the ingress of dirt (2.2.C.1c)
Nearside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Inner Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake discs rusted on inner edges
Rear inner anti roll bar bushes worn
rear load area has been converted and all rear seat belts have been removed
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
rear load area has been converted and all rear seat belts have been removed
Nearside Inner Front brake disc excessively pitted (3.5.1h)
Offside Inner Front brake disc excessively pitted (3.5.1h)
Nearside Front brake disc slightly pitted (3.5.1h)
Nearside Rear brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Offside Rear brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P292 YDS is a 2006 Mazda Bongo in White with a 2,495cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P292 YDS, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P292 YDS?
You can check the full history of P292 YDS by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P292 YDS registered?
P292 YDS is a 2006 Mazda Bongo, first registered on 1 June 2006.
Is P292 YDS safe to buy?
The MOT history for P292 YDS shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P292 YDS have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P292 YDS. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.