1996 Volvo V40

Emissions not tested (7.0)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Obligatory mirror missing (8.1.1)

Nearside Outer Rear position lamp(s) not working (1.1.A.3b)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Outer Front position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Battery insecure

Body has slight corrosion (6.1.B.2)

Front Brake hose slightly deteriorated (3.6.B.4d)

Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Fuel pipe/s corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake hose slightly deteriorated (3.6.B.4d)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Vehicle structure has slight corrosion (6.1.A.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

coil spring corroded (2.4.C.1b)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Brake master cylinder leaking hydraulic fluid (3.6.G.1f)

Front Brake pipe inadequately clipped (3.6.B.1)

Front registration plate deteriorated (6.3.1d)

Offside Front Direction indicators not working (1.4.A.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.5c)

Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Direction indicators incorrect colour (1.4.A.2f)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Direction indicator insecure (1.4.A.2b)

Offside Front Direction indicators incorrect colour (1.4.A.2f)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Tie bar/rod rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Windscreen wiper blade deteriorated (8.2.2)

both rear brake hoses insecure †both lower ball joints have slight play †o/s rear tyre worn on inner edge †n/s rear brake binding slightly

Offside Rear coil spring fractured (2.4.C.1a)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

cat heat sheild insecure

rear engine mounting cross member bolt missing