MOT Status
ValidMileage
166,925 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis just behind springs (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel arch (5.3.6 (a) (i))
Offside Front Hydraulic brake calliper leaking from bleed nipple (1.1.16 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Service brake lagging in operation (1.2.1 (d))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel arch (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner bushes (5.3.4 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis just behind springs (5.3.6 (a) (i))
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Central Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bushes (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Headlamp light intensity severely reduced dip Beam (4.1.4 (a))
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement d bushes (5.3.4 (a) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement d bushes (5.3.4 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D Bushes (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front of wheel arch (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D Bushes (5.3.4 (a) (i))
Offside Rear lens damaged
Central Rear non obligatory stop lamp
Nearside mirror taped on
Offside Rear light taped up
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear reflector missing (4.8.2 (a) (ii))
Central Rear non obligatory stop lamp
Nearside mirror taped on
Offside Rear light taped up
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear light taped up
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear light taped up
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
offside rear lens damaged and repaired with tape
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
offside rear lens damaged and repaired with tape
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
offside rear lens broken and repaired with red tape
offside rear lens damaged
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
no plate characters are in line with tricycles etc vehicle is an import with no room for margins with full size characters
offside rear lens damaged
Rear Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P317 FTT is a 1997 Mazda Bongo in Blue with a 2,500cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 74.1%.
Across all 1997 Mazda Bongo models, the average MOT pass rate is 66.3% with a typical mileage of 131,832 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P317 FTT, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 29 years old, this Mazda Bongo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P317 FTT?
You can check the full history of P317 FTT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P317 FTT registered?
P317 FTT is a 1997 Mazda Bongo, first registered on 1 January 1997.
Is P317 FTT safe to buy?
The MOT history for P317 FTT shows 27 tests with a 74.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P317 FTT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P317 FTT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.