1997 Honda Civic

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

n/s window not operating

Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Front Ball joint ball pin shank loose (2.2.B.1c)

Front front brake application uneven (3.7.B.2)

Front front brake binding (3.7.B.1)

Nearside Front Ball joint ball pin shank loose (2.2.B.1c)

Nearside Front Braking system leaking (3.6.A.1)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside Rear Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Ball joint has excessive play (2.2.B.1f)

Offside Front Front constant velocity joint is insecure (2.5.C.1b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Trailing arm has slight play in a pin/bush (2.4.G.2)

n/s window not operating

Centre Exhaust system not adequately supported (7.1.1)

Direction indicator has a product on the lens so it is not visible from a reasonable distance (1.4.A.2e)

Emissions not tested (7.0)

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front registration plate non-reflective border wider than permitted (6.3.4h)

Nearside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Rear Body has a sharp edge caused by damage (6.1.C.1)

Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

OS track rod has slight play

OSF brake hose ferrul corroded

OSF wheel damaged

OSR tread low

Rear fog lamp has light sources not illuminating, but not more than 50% (1.3.2b)

free plat at handbrake

nsr lense broken

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Emissions not tested (7.0)

Nearside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Front Upper Suspension arm locating pin retaining device missing (2.4.G.3b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Exhaust backbox fouling body when moved

Fuel lines corroded slightly

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Emissions test failed due to Lambda level too high after second fast idle test

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)

Offside Rear Vehicle structure has slight corrosion (6.1.B.2)

Bonnet retaining device ineffective (8.4.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front coil spring fractured (2.4.C.1a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Upper Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Upper Brake pipe excessively corroded (3.6.B.2c)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Headlamp aim too low (1.8)

Nearside Front position lamp(s) not working (1.1.A.3b)

Oil leak