1997 BMW Z3

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s)

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive Back plate (1.1.21 (e) (i))

Nearside sill cover corroded but secure

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Play in steering rack inner joint(s)

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive Back plate (1.1.21 (e) (i))

Offside sill cover corroded but secure

Parking brake has travel but not excessive

Rear Sub-frame corroded but not seriously weakened Including all attached suspension arms (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Windscreen damaged but not adversely affecting driver's view Chipped (3.2 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases Small silencer on rear section (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front inner sill, as marked (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front inner sill, as marked (5.3.6 (a) (i))

Nearside Rear Sub-frame attachment bracket/mounting likely to fail As marked (5.3.3 (b) (ii)) DANGEROUS

Exhaust mounting defective Rear silencer (6.1.2 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Play in steering rack inner joint(s)

Nearside Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive Brake back plate (1.1.21 (e) (i))

Nearside Rear Shock absorbers has slight external damage to the casing Due to corrosion (5.3.2 (b))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Nearside outer sill cover corroded

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Play in steering rack inner joint(s)

Offside Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Parking brake mechanism/associated mounting prescribed area is corroded but not considered excessive Brake back plate (1.1.21 (e) (i))

Offside Rear Parking brake output low

Offside Rear Shock absorbers has slight external damage to the casing Due to corrosion (5.3.2 (b))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive Inner sill (5.3.6 (a) (i))

Offside outer sill cover corroded

Rear Sub-frame corroded but not seriously weakened ON LIMIT (5.3.3 (b) (i))

Windscreen damaged but not adversely affecting driver's view Chipped (3.2 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Obligatory mirror slightly loose (3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Subframe bracket corroded

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Subframe mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Horn not working (7.7 (a))

Nearside Front Obligatory mirror insecure (3.3 (b) (ii))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Exhaust rubber broken

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Sill cover corroded

Windscreen damaged but not adversely affecting driver's view Chip (3.2 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Exhaust rubber broken

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Off side sill corroded

Windscreen damaged but not adversely affecting driver's view Chip (3.2 (a) (i))

Engine oil level near minimum mark on dipstick

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Nearside Front Inner track rod slight play

Offside Front Inner track rod slight play

Offside Outer Center sill corroded

Rear Exhaust rubber mounting broke but exhaust still secure

Offside Rear rear brake binding (3.7.B.1)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Engine oil level near minimum mark on dipstick

Nearside Front Inner Suspension arm rubber bush deteriorated but not resulting in excessive movement Rear (2.4.G.2)

Nearside Front Inner track rod slight play

Offside Front Inner track rod slight play

Offside Outer Center sill corroded

Rear Exhaust rubber mounting broke but exhaust still secure

Central Rear Upper Stop lamp not working (1.2.1b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Rear Brakes imbalanced across an axle (3.7.B.5b)

Rear fog lamp switch faulty (1.3.1a)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Nail in tyre

Nearside Front inner door handle loose

Nearside Rear Tyre worn close to the legal limit inner edge worn (4.1.E.1)

Offside Front Play in steering rack inner joint(s)

exhaust system corroded

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

oil leak

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Nearside Front Shock absorber has a light misting of oil (2.7.3)