2006 Mazda MPV

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Front Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover missing (5.3.4 (b) (ii))

n/s/r floor corroded not in prescribed area

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Tyre worn close to legal limit/worn on edge Both front tyres near wear markers and cracking in tread area (5.2.3 (e))

Oil leak, but not excessive Rear of engine (8.4.1 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge + nail (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge + nail (5.2.3 (e))

Oil leak, but not excessive (8.4.1 (a) (i))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Anti-roll bar ball joint excessively worn droplink (5.3.4 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Brake pad(s) wearing thin very low (1.1.13 (a) (ii))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

All tyres near limit

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Rear Anti-roll bar attachment bracket/mounting fractured (2.4.G.1) DANGEROUS

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) DANGEROUS

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Oil leak

Body has slight corrosion (6.1.B.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Upper Body has slight corrosion (6.1.B.2)

n/s and o/s outer sills corroded but not holed at time of test

Body has slight corrosion (6.1.B.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Upper Body has slight corrosion (6.1.B.2)

Body has slight corrosion (6.1.B.2)

Upper Body has slight corrosion (6.1.B.2)

o/s outer sill rusty not holed at time of test

Exhaust has a major leak of exhaust gases (7.1.2)

Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Rear fog lamp insecure (1.3.2a)

o/s outer sill rusty not holed at time of test