1996 Rover Mini

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))

Nearside Front Upper Suspension component ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength in front of subframe and rear of subframe marked with chalk (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength in front of subframe and behind subframe marked with chalk (5.3.6 (a) (i))

Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front floor corroded but not within perscribed area

corrosion inside front door shuts but not within perscribed area

Nearside Rear tyre badly perished

Nearside Steering rack gaiter deteriorated (2.2.D.2d)

Nearside Seat belt anchorage prescribed area is excessively corroded body sill (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded body silll (5.2.6)

Offside Rear Subframe mounting prescribed area is excessively corroded inner panel (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded door step (5.2.6)

Driver's seat cannot be secured in the upright position. (6.2.A.2)

Nearside Front Upper Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside Steering rack gaiter split (2.2.D.2d)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Front Upper Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Side repeater not working (1.4.A.2c)

n/s and o/s/f jacking points corroded

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Direction indicator not working (1.4.A.2c)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp aim too high (1.8)

Nearside Stop lamp not working (1.2.1b)

Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Offside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Ball joint has slight play (2.2.B.1f)

All underbody pannels starting to corrode

Brake pipe slightly corroded (3.6.B.2c)

Fuel pipe/s corroded

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear wheel cylinder securing device missing (3.5.1j)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

All underbody pannels starting to corrode

Brake pipe slightly corroded (3.6.B.2c)

Fuel pipe/s corroded

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Sub-frame rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front wheel bearing has slight play (2.5.A.3c)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Sub-frame corroded and seriously weakened (2.4.G.1)

Offside Front wheel bearing has slight play (2.5.A.3c)