MOT Status
ExpiredMileage
133,979 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Brake damaged to the extent that the braking system is adversely affected brakes binding both sides to such an extent that the wheels cannot be turned by hand and wheel bearings could not be checked. (1.1.21 (a) (i))
Offside Rear Brake insecure backplate (1.1.21 (c))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust has a minor leak of exhaust gases Joint behind cat. (6.1.2 (a))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor/chassis (5.3.6 (a) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wings both sides (5.3.6 (a) (i))
Unable to assess condition of sills due to covers
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both (5.3.4 (a) (i))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner wing and strut top (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Shock absorbers has a reduced damping effect Both (5.3.2 (d))
Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))
Front Brakes imbalanced across an axle offside low (1.2.1 (b) (i))
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing and strut top (5.3.6 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Shock absorbers has a reduced damping effect Both (5.3.2 (d))
Brake pipe corroded, covered in grease or other material Central unions on front to rear (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Exhaust mounting defective Exhaust flange very badly corroded (6.1.2 (a))
Nearside Front floor has small hole outside prescribed areas
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both front chassis by subframe mounting points (5.3.6 (a) (i))
Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))
Offside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material Central unions on front to rear (1.1.11 (c))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Exhaust mounting defective Exhaust flange very badly corroded (6.1.2 (a))
Nearside Front floor has small hole outside prescribed areas
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive Both front chassis by subframe mounting points (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement saddle bush (5.3.4 (a) (i))
Nearside Front floor corroded outside prescribed areas
Offside Brake hose has slight corrosion to ferrule both front & rear (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement saddle bush (5.3.4 (a) (i))
Nearside Front floor corroded outside prescribed areas
Offside Brake hose has slight corrosion to ferrule both front & rear (1.1.12 (f) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material at union (1.1.11 (c))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced Wing (7.1.1 (a) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Tyre slightly damaged/cracking or perishing Both (5.2.3 (d) (ii))
Headlamp lens slightly defective Both (4.1.1 (b) (i))
Rear Brake pipe corroded, covered in grease or other material at union (1.1.11 (c))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened inner face (1.1.14 (a) (ii))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive Both rear inner wings (7.1.1 (a) (i))
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Bonnet cannot be secured in the closed position (8.4.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)
Towbar component excessively corroded (6.6.1)
Trailer electrical socket insecure (1.9.3a)
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive door sills , both sides (5.2.6)
Towbar component slightly corroded brackets (6.6.1)
brake pedal rubber , edge worn
Battery insecure (1.9.1)
Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)
Rear Sub-frame corroded and seriously weakened (2.4.G.1)
Headlamp deteriorated but light output not reduced both (1.7.5a)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Seat belt anchorage prescribed area is corroded but not considered excessive door sills , both sides (5.2.6)
Towbar component slightly corroded brackets (6.6.1)
brake pedal rubber , edge worn
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Plastic cover sills fitted restricting inspection of sill panels.
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Nearside Front Brake hose leaking (3.6.A.1)
Nearside Front Lower Suspension arm insecure (2.4.G.1)
Plastic cover sills fitted restricting inspection of sill panels.
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Child seats fitted to Near-side and Off-side rear
Exhaust has part of the system slightly deteriorated (7.1.1a)
Near-side rear lamp glass has been repaired (appears satisfactory)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high and too far to the right. (1.8)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper blade insecure (8.2.2)
Child seats fitted to Near-side and Off-side rear
Exhaust has part of the system slightly deteriorated (7.1.1a)
Near-side rear lamp glass has been repaired (appears satisfactory)
How Reliable is the Subaru Forester?
Based on 456,470 MOT tests across 33,044 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P33 SBW is a 2001 Subaru Forester in Silver with a 1,994cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2001 Subaru Forester models, the average MOT pass rate is 72.5% with a typical mileage of 96,565 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Forester fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 8,106 recorded failures. If you're considering buying P33 SBW, it's worth having these areas checked by a mechanic before committing.
The Subaru Forester typically stays on UK roads for around 29 years. At 25 years old, this Subaru Forester is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P33 SBW?
You can check the full history of P33 SBW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P33 SBW registered?
P33 SBW is a 2001 Subaru Forester, first registered on 3 April 2001.
Is P33 SBW safe to buy?
The MOT history for P33 SBW shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P33 SBW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P33 SBW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.