MOT Status
ExpiredMileage
157,388 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive rear most (5.3.6 (a) (i))
Nearside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Power steering component leaking rack (2.1.5 (a))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive rear most (5.3.6 (a) (i))
Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Rear position lamp(s) slightly affected by the operation of another lamp (1.1.A.3f)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Service brake: efficiency below requirements (3.7.B.7)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened x2 (3.5.1i)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front front brake fluctuating, but not excessively (3.7.B.3)
Underside of vehicle well coated in underseal
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
coil spring corroded (2.4.C.1b)
corrosion to the exhaust
corrosion to the inner and outter sills
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
coil spring corroded (2.4.C.1b)
corrosion to the exhaust
corrosion to the inner and outter sills
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front registration plate deteriorated (6.3.1d)
Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
floors corroded
inner & outer sills corroded
rear chassis corroded
Nearside Front Brake hose excessively damaged (3.6.B.4d)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P356 LYC is a 1997 Mazda 323 in Blue with a 1,489cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 1997 Mazda 323 models, the average MOT pass rate is 65.3% with a typical mileage of 91,044 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying P356 LYC, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 29 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P356 LYC?
You can check the full history of P356 LYC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P356 LYC registered?
P356 LYC is a 1997 Mazda 323, first registered on 30 April 1997.
Is P356 LYC safe to buy?
The MOT history for P356 LYC shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P356 LYC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P356 LYC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.