MOT Status
ExpiredMileage
65,418 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Anti-lock braking system warning lamp does not illuminate (1.6 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Headlamp aim too high (4.1.2 (a))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Coil spring corroded All (5.3.1 (b) (i))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear mounting of subframe (5.3.6 (a) (i))
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor (6.1.1 (c) (i))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear mounting of subframe (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch (6.1.1 (c) (i))
Offside Rear Service brake lagging in operation (1.2.1 (d))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Coil spring corroded All (5.3.1 (b) (i))
Offside Rear Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor pan (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
both front tyres wearing low on inner edges
slight corrosion o/s/f floor
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
both front tyres wearing low on inner edges
slight corrosion o/s/f floor
Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt both (2.2.C.1c)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Front Brakes imbalanced across an axle (3.7.B.5b)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
both front brake discs slightly corroded on inner surfaces
corrosion o/s floor
corrosion o/s/r inner wheel arch
Brakes imbalanced across an axle (3.7.B.5b)
Offside Rear rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear rear brake application uneven (3.7.B.2)
front brake application uneven (3.7.B.2)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
both front brake discs slightly corroded on inner surfaces
corrosion o/s floor
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp aim too low (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Anti-lock braking system warning lamp does not illuminate (3.4.1b)
Brakes imbalanced across an axle (3.7.B.5b)
Driver's airbag obviously defective (5.4.1)
Nearside Front Headlamp aim too low and too far to the left. (1.8)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Headlamp aim too low and too far to the left. (1.8)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Advise:cross member at front of vehicle that holds radiator in place very corroded and some rust holes.
Advise:general rust under body and on running gear.
Advise:general rust.
Advise:underseal used under entire underside of vehicle.
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Vehicle structure has slight corrosion (6.1.B.2)
Offside Front Vehicle structure has slight corrosion (6.1.B.2)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parking brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Offside rear brake recording little or no effort (3.7.B.5a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Bonnet retaining device ineffective (8.4.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Child seat fitted not allowing full inspection of adult belt
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Front brake disc slightly pitted (3.5.1h)
Rear coil spring corroded (2.4.C.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc slightly pitted (3.5.1h)
Rear coil spring corroded (2.4.C.1b)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Emissions not tested (7.0)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
rear brakes release unevenly (3.7.B.4)
rear brake application uneven (3.7.B.2)
corrosion n/s/c + o/s/r floors
corrosion n/s/c floor
How Reliable is the Fiat Barchetta?
Based on 21,950 MOT tests across 1,985 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P357 EAB is a 1996 Fiat Barchetta in Grey with a 1,747cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 53.1%.
Across all 1996 Fiat Barchetta models, the average MOT pass rate is 68.7% with a typical mileage of 86,952 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Barchetta fails its MOT is parking brake: efficiency below requirements, accounting for 1,301 recorded failures. If you're considering buying P357 EAB, it's worth having these areas checked by a mechanic before committing.
The Fiat Barchetta typically stays on UK roads for around 31 years. At 30 years old, this Fiat Barchetta is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P357 EAB?
You can check the full history of P357 EAB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P357 EAB registered?
P357 EAB is a 1996 Fiat Barchetta, first registered on 3 September 1996.
Is P357 EAB safe to buy?
The MOT history for P357 EAB shows 32 tests with a 53.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P357 EAB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P357 EAB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.