MOT Status
ExpiredMileage
118,269 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Brake pad(s) wearing thin (3.5.1g)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
Brake pipe slightly corroded (3.6.B.2c)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Tyre worn close to the legal limit (4.1.E.1)
coil spring corroded (2.4.C.1b)
n/s/f brake disc scored
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Exhaust system not adequately supported (7.1.1)
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Brake pad(s) wearing thin (3.5.1g)
Front Exhaust system not adequately supported (7.1.1)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Nearside Headlamp aim too low (1.8)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Headlamp aim too low (1.8)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 323?
Based on 823,541 MOT tests across 88,407 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P371 BTH is a 1997 Mazda 323 in Silver with a 1,489cc petrol engine. This vehicle has been through 12 MOT tests with a personal pass rate of 66.7%.
Across all 1997 Mazda 323 models, the average MOT pass rate is 65.3% with a typical mileage of 91,044 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 323 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 53,662 recorded failures. If you're considering buying P371 BTH, it's worth having these areas checked by a mechanic before committing.
The Mazda 323 typically stays on UK roads for around 38 years. At 29 years old, this Mazda 323 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P371 BTH?
You can check the full history of P371 BTH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P371 BTH registered?
P371 BTH is a 1997 Mazda 323, first registered on 31 January 1997.
Is P371 BTH safe to buy?
The MOT history for P371 BTH shows 12 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P371 BTH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P371 BTH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.