MOT Status
ExpiredMileage
247,800 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both sides (5.3.4 (b) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt upper and lower ball joint dust covers (5.3.4 (b) (ii))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Central Front Power steering component has slight seepage from a component hoses to steering rack damp (2.1.5 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Offside Oil leak, but not excessive engine slightly damp with engine oil (8.4.1 (a) (i))
Offside Rear Upper Anti-roll bar ball joint has slight play play in drop link (5.3.4 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Rear rear axel has general corrosion
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
underside and sills covered in underseal
Horn not working (7.7 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
underside and sills covered in underseal
Horn not working (7.7 (a))
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp has a product on the light source so that the light output is severely reduced (4.1.4 (b))
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Upper Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
o/s outer and inner sill heavily corroded but not within a prescribed area
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
o/s inner sill corroded
Horn not working (7.7 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Tyre has ply or cords exposed outer wall (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
o/s inner sill corroded
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
front tyres perished
rear tyre perished
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Brake disc worn, pitted or scored, but not seriously weakened both rear (1.1.14 (a) (ii))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
front tyres perished
rear tyre perished
Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Nearside Front Steering rack gaiter split (2.2.D.2d)
Nearside Front front brake binding (3.7.B.1)
Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front front brake binding (3.7.B.1)
Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
rear seat removed
rear seats facing rear .seat belts fitted for forward facing seats
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
n/s/f inner sill becoming corroded
n/s/r outer wheel arch becoming corroded
Horn not working (1.6.2a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Rear Body has a sharp edge caused by damage (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Stop lamp emits other than a steady red light (1.2.1e)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Parking brake lever has little reserve travel (3.1.6b)
Rear brake pads getting low
n/s/f inner sill becoming corroded
n/s/r outer wheel arch becoming corroded
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Both rear tyres cracking and perishing
Both rear tyres on limit
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside front tyre on limit
Front Brake pad(s) wearing thin (3.5.1g)
Nail in offside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
n/s/r inner sill holed ( not reducing strength of panel).
n/s/r suspension bump stop missing
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P376 AHO is a 2006 Mazda Bongo in Maroon with a 2,490cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Mazda Bongo models, the average MOT pass rate is 66.5% with a typical mileage of 130,909 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P376 AHO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 20 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P376 AHO?
You can check the full history of P376 AHO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P376 AHO registered?
P376 AHO is a 2006 Mazda Bongo, first registered on 18 July 2006.
Is P376 AHO safe to buy?
The MOT history for P376 AHO shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P376 AHO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P376 AHO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.