MOT Status
ExpiredMileage
55,076 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Arch (6.1.1 (c) (i))
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Cross member (6.1.1 (c) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
vehicle structure has slight corrosion front to rear
Nearside Front floor has been previously welded from inside vehicle
all welding repairs from inside of vehicle
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced mid floor (7.1.1 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front floor has been previously welded from inside vehicle
Nearside and offside floor corroded but seems to have been repaired from inside
Over sills fitted not allowing full inspection of outer sills
Rear cross member corroded
Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Offside Obligatory mirror insecure (8.1.1)
Service brake: efficiency below requirements (3.7.B.7)
Nearside and offside floor corroded but seems to have been repaired from inside
Over sills fitted not allowing full inspection of outer sills
Rear cross member corroded
Nearside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
back panel corroding
rear panel corroding
Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
rear panel corroded
Fuel system component insecure (7.2.1)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Radius arm has slight play in a pin/bush (2.4.G.2)
rear panel corroded
n/s/r floor corroding
rear panel corroding
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both inner sills corroding
extensive welding repairs carried out to floor and jacking points
fuel filler neck corroding
n/s/r wheel arch corroding
o/s wiperblade split
only 50% of n/s washer jet working
plastic covers fitted to outer sills
rear chasis corroded but not within 30cm of suspension
slight pulseing on rear sidelights
lower rear inner panel corroded & adjacent corners
plastic covers on sills
several welded areas underside
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
lower rear inner panel corroded & adjacent corners
plastic covers on sills
several welded areas underside
rear panel corroding
Headlamp aim too low (1.8)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Side repeater not working (1.4.A.2c)
front suspension low
rear panel corroding
front suspension low
plastic covers on sills cannot test these
Nearside Rear Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension arm corroded and seriously weakened (2.4.G.1)
front suspension low
plastic covers on sills cannot test these
cut in n/s/f tyre wall
has had extensive floor repairs
rear lower inner panel corr
Battery insecure
Seat belt anchorage prescribed area is excessively corroded (5.2.6)
How Reliable is the Rover 114?
Based on 112,346 MOT tests across 22,170 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P386 MLW is a 1997 Rover 114 in Black with a 1,396cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 1997 Rover 114 models, the average MOT pass rate is 64.0% with a typical mileage of 49,262 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Rover 114 fails its MOT is seat belt anchorage prescribed area is excessively corroded, accounting for 11,635 recorded failures. If you're considering buying P386 MLW, it's worth having these areas checked by a mechanic before committing.
The Rover 114 typically stays on UK roads for around 31 years. At 29 years old, this Rover 114 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P386 MLW?
You can check the full history of P386 MLW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P386 MLW registered?
P386 MLW is a 1997 Rover 114, first registered on 25 February 1997.
Is P386 MLW safe to buy?
The MOT history for P386 MLW shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P386 MLW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P386 MLW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.