2003 Mazda Bongo

Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Front Oil leak, but not excessive gear box (8.4.1 (a) (i))

Front Vehicle structure is deformed but structural rigidity is not significantly reduced to rear in both sides inner under sill (6.1.1 (a) (i))

Front Headlamp aim too high both sides (4.1.2 (a))

Front Oil leak, but not excessive gear box (8.4.1 (a) (i))

Front Vehicle structure is deformed but structural rigidity is not significantly reduced to rear in both sides inner under sill (6.1.1 (a) (i))

Rear SERVICE-(FOOT BRAKE) LOW EFFORT 194:183KG

Horn not working (7.7 (a))

Rear SERVICE-(FOOT BRAKE) LOW EFFORT 194:183KG

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Both headlamp lenses faded , suggest refurb.

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside front brake binding (3.7.B.1)

Both headlamp lenses faded , suggest refurb.

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Outer Seat belt anchorage prescribed area is corroded but not considered excessive sill (5.2.6)

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Headlamp deteriorated but light output not reduced (1.7.5a)

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Engine covers fitted obscuring some components in the engine bay

Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Under-trays fitted obscuring some underside components

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both front tyres worn on inner edge

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear rear parking brake recording little or no effort (3.7.B.6a)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

both front tyres worn on inner edge