MOT Status
ValidMileage
186,267 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Power steering component has slight seepage from a component rack (2.1.5 (a))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Radiator support holed and corroded
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Radiator support holed and corroded
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe support around jacking point (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Subframe support around jacking point (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Lower Shock absorbers has an excessively worn bush (5.3.2 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Nearside Power steering component has slight seepage from a component Rack end (2.1.5 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Radiator support heavily corroded and holed
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced crossmember (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Vehicle structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced centre sill outer (6.1.1 (c) (i))
brake pipes corroding
sills corroding
Nearside Rear Service brake excessively binding (1.2.1 (f))
brake pipes corroding
sills corroding
Nearside Rear Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear hub damp
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear hub damp
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Front Subframe mounting prescribed area is excessively corroded cross member (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Lower Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside rear hub seal leaking
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Battery insecure (1.9.1)
Offside Battery insecure (1.9.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
nearside front wing damaged
offside rear hub seal leaking
Damage to N/S/F wing.
Damage to N/S/F wing.
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim too high (1.8)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front front brake application uneven (3.7.B.2)
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside front tyre cracking but not deep enough to reach ply or cords
nearside rear tyre cracking but not deep enough to reach ply or cords
offside front tyre cracking but not deep enough to reach ply or cords
offside rear tyre cracking but not deep enough to reach ply or cords
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
near side front tyre cracking but not deep enough to reach ply or cords
near side rear tyre cracking but not deep enough to reach ply or cords
off side front tyre cracking but not deep enough to reach ply or cords
off side rear tyre cracking but not deep enough to reach ply or cords
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P405 FWP is a 2008 Mazda MPV in White with a 2,261cc petrol engine. This vehicle has been through 30 MOT tests with a personal pass rate of 56.7%.
Across all 2008 Mazda MPV models, the average MOT pass rate is 65.5% with a typical mileage of 123,825 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying P405 FWP, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 18 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P405 FWP?
You can check the full history of P405 FWP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P405 FWP registered?
P405 FWP is a 2008 Mazda MPV, first registered on 11 September 2008.
Is P405 FWP safe to buy?
The MOT history for P405 FWP shows 30 tests with a 56.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P405 FWP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P405 FWP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.