MOT Status
ExpiredMileage
53,807 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded chassie (3.1.9)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint drop link (2.4.G.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Oil leak
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brakes imbalanced across an axle (3.7.B.5b)
Front registration plate deteriorated (6.3.1d)
Nearside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Driver's seat insecure (6.2.A.1)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear registration plate deteriorated (6.3.1d)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
o/s/r outer wheel arch corroded
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Service brake: efficiency below requirements (3.7.B.7)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Oil leak
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
o/s/r outer wheel arch corroded
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate faded but not likely to be misread (6.3.1d)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Front Headlamp aim too low (1.8)
Offside Rear rear brake binding (3.7.B.1)
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake master cylinder fluid close to minimum level (3.6.G.1e)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
offside and nearside front brake disks corroded
Front brake disc slightly pitted (3.5.1h)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P407 PUG is a 1996 Mazda 121 in Blue with a 1,242cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 66.7%.
Across all 1996 Mazda 121 models, the average MOT pass rate is 60.8% with a typical mileage of 57,937 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying P407 PUG, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 30 years old, this Mazda 121 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P407 PUG?
You can check the full history of P407 PUG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P407 PUG registered?
P407 PUG is a 1996 Mazda 121, first registered on 31 October 1996.
Is P407 PUG safe to buy?
The MOT history for P407 PUG shows 15 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P407 PUG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P407 PUG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.