MOT Status
ExpiredMileage
233,799 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve linkage seized (3.6.E.3)
Fuel system component leaking (7.2.3)
Nearside Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim too high (1.8)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Sub-frame corroded and seriously weakened (2.4.G.1)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear Brake pipe excessively corroded (3.6.B.2c)
Oil leak
entire underside of vehicle is in a state of corrosion
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
nearside rear chassis starting to show signs of corrosion
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brake pipe excessively corroded (3.6.B.2c)
Brake load sensing valve linkage seized (3.6.E.3)
Brake pipe excessively corroded (3.6.B.2c)
Brake pipe excessively corroded (3.6.B.2c)
Fuel system component leaking (7.2.3)
Headlamp aim not tested (1.8.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front brake disc excessively pitted (3.5.1h)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Position lamp switch faulty (1.1.A.1)
Brake master cylinder fluid close to minimum level (3.6.G.1e)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
How Reliable is the Seat Inca?
Based on 79,781 MOT tests across 8,113 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P415 MTM is a 1996 Seat Inca in White with a 1,896cc diesel engine. This vehicle has been through 6 MOT tests with a personal pass rate of 50%.
Across all 1996 Seat Inca models, the average MOT pass rate is 60.5% with a typical mileage of 124,434 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Seat Inca fails its MOT is brake pipe excessively corroded, accounting for 9,617 recorded failures. If you're considering buying P415 MTM, it's worth having these areas checked by a mechanic before committing.
The Seat Inca typically stays on UK roads for around 30 years. At 30 years old, this Seat Inca is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of P415 MTM?
You can check the full history of P415 MTM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P415 MTM registered?
P415 MTM is a 1996 Seat Inca, first registered on 1 August 1996.
Is P415 MTM safe to buy?
The MOT history for P415 MTM shows 6 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P415 MTM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P415 MTM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.