1996 Toyota Landcruiser

Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring seat........ (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis........ (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Coil spring mounting corroded but not seriously weakened both rear...... (5.3.1 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both front lower........ (5.3.4 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both front upper........ (5.3.4 (b) (i))

both rear bump stops insecure........

offside inner rear crossmember corroded........

Offside Rear Position lamp not working (4.2.1 (a))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Rear Upper Suspension arm attachment bracket/mounting insecure and impairing directional stability trailing arm........ (5.3.3 (a) (ii)) DANGEROUS

Coil spring mounting corroded but not seriously weakened both rear...... (5.3.1 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both front lower........ (5.3.4 (b) (i))

Suspension arm ball joint dust cover severely deteriorated both front upper........ (5.3.4 (b) (i))

both rear bump stops insecure........

offside inner rear crossmember corroded........

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill.......... (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill........ (2.4.A.3)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

rear brake pads are thin......

Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis...... (6.6.6)

Nearside Stop lamp not working (1.2.1b)

Nearside Suspension component mounting prescribed area is excessively corroded chassis at rear trailing arm front mounting...... (2.4.A.3)

Offside Suspension component mounting prescribed area is excessively corroded chassis at rear trailing arm front mounting...... (2.4.A.3)

Vehicle structure excessively corroded within 30cm of towbar mounting rear crossmember...... (6.6.6)

both rear suspension bump stops are detatched.......

rear body crossmember is corroded.....

rear chassis crossmember is corroded

slight corrosion to both front body mountings

slight corrosion to offside rear inner sill

towbar has 1 bolt missing.....

Nearside Headlamp aim too high (1.8)

Nearside Rear Brake actuating linkage mounting prescribed area is excessively corroded chassis around load valve... (3.3.A.2)

Offside Headlamp aim too far to the left (1.8)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis x2 as marked.... (2.4.A.3)

both rear suspension bump stops are detatched.......

rear body crossmember is corroded.....

rear chassis crossmember is corroded

slight corrosion to both front body mountings

slight corrosion to offside rear inner sill

towbar has 1 bolt missing.....

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Brake valve insecurely mounted (3.6.A.2a)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Track rod end ball joint has slight play (2.2.B.1f)

O/S/R Body mount corroded and poor

both front body mounts slightly corroded

rear crossmember corroded

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Parking brake: efficiency below requirements (3.7.C.1b)

Both sill backs at rear corroded

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Rear body mounts corroded

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Slight play in O/S/F lower arm rear bush

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Oil leak from engine / sump area.

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Offside Headlamp aim too low (1.8)

Offside Rear Brake clevis joint has restricted free movement (3.5.1k)

Parking brake: efficiency below requirements (3.7.C.1b)

Offside Front Seat belt damaged but webbing not significantly weakened (5.2.2a)

Oil leak from engine / sump area.

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Anti-roll bar linkage insecure (2.4.G.1)

Offside Rear Shock absorber detached (2.7.2b)

Offside Rear fog lamp not working (1.3.2b)

Parking brake lever has no reserve travel (3.1.6b)

Rear registration plate delaminated (6.3.1d)

Service brake: efficiency below requirements (3.7.B.7)