MOT Status
ExpiredMileage
191,622 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Front Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre obviously under inflated (5.2.3 (l))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive Sill (7.1.1 (a) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Rear chassis legs (6.1.1 (c) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced Both sills (6.1.1 (d) (i))
Rear Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced Rear chassis legs (6.1.1 (c) (i))
Integral body structure is repaired but structural rigidity is not significantly reduced Both sills (6.1.1 (d) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material All (1.1.11 (c))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Under radiator (6.1.1 (c) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Front Battery insecure (1.9.1)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive and off side inner outer sills (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive and off side inner outer sills (5.2.6)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner outer sill (2.4.A.3)
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
both rear tyres slight cracks in side walls.
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
P421 LMO is a 2003 Mazda Bongo in Grey with a 2,499cc diesel engine. This vehicle has been through 28 MOT tests with a personal pass rate of 67.9%.
Across all 2003 Mazda Bongo models, the average MOT pass rate is 68.1% with a typical mileage of 124,847 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying P421 LMO, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 23 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of P421 LMO?
You can check the full history of P421 LMO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was P421 LMO registered?
P421 LMO is a 2003 Mazda Bongo, first registered on 1 September 2003.
Is P421 LMO safe to buy?
The MOT history for P421 LMO shows 28 tests with a 67.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does P421 LMO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on P421 LMO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.